Clyson Windows & Doors (920) 242-2424

Windows and doors for Milwaukee Polish flats

The Polish flat is Milwaukee's own house type: a small frame cottage jacked up and given a second home underneath. Working on one means understanding how it got that way.

What a Polish flat is

From the 1880s on, Polish immigrant families on the South Side and in Riverwest built modest wood cottages, then raised them and added a brick or block half-basement flat below to house relatives or tenants. The result is two units stacked on a narrow lot, with the lower one partly below grade.

That history shows in the openings. Upper windows are tall, narrow double-hungs in a balloon frame. Lower windows are short, set in masonry near the ground, and take the worst of the snow and splashback. Entries have often been moved, enclosed or added over the years.

Common jobs

  • Lower-flat windows. Rotted frames in masonry openings replaced, with proper sills and flashing so they stop taking in water.
  • Upper-flat double-hungs. Replaced in non-standard sizes, or repaired and weatherstripped where they are sound.
  • Basement unit doors. Short, out-of-square openings fitted with doors that seal and lock.
  • Front and side entries. Entry and storm doors for both units, including shared stair halls.
  • Undoing bad replacements. Undersized vinyl units with filled-in gaps taken out and the opening brought back to full size.

The same approach applies to the worker cottages and frame duplexes that sit beside them throughout Riverwest.

Common questions

Can you replace windows set in the brick lower level?

Yes. Tim removes the old frame, repairs the masonry opening and sill as needed and installs a window sized to the opening.

Do you work for landlords and duplex owners?

Yes. Many Polish flats are owner-occupied duplexes or rentals, and Tim schedules work around tenants.